Teamspeak block!

[JOSHSKORN]

I've got a problem here.  I've switched game hosting companies and have gotten a new webhost.  I've found out recently, like a half hour ago, that my webhost 'doesn't support TeamSpeak'.  This was the response I got when asked about opening ports for TS.  I'm using IXWebhosting.

Any thoughts?  Is there a way to install this block on another server such as geocities and use it from there?

[G6Cad]

Please read the posting guides we have in the forum and site.
No support will be given in the block code and snippets board.
I will move this to support

[-Prismatic-]

Please read the posting guides we have in the forum and site.
No support will be given in the block code and snippets board.
I will move this to support

Little late to be moving it this thread has been here for 2 years with Admins even joining the discussion.

[IchBin]

I've got a problem here.  I've switched game hosting companies and have gotten a new webhost.  I've found out recently, like a half hour ago, that my webhost 'doesn't support TeamSpeak'.  This was the response I got when asked about opening ports for TS.  I'm using IXWebhosting.

Any thoughts?  Is there a way to install this block on another server such as geocities and use it from there?

If the host doesn't open the ports for TeamSpeak then you are out of luck. However, I'm a bit confused as to which host you're talking about. The teamspeak host, or your website host? The website host doesn't need any ports opened, only the teamspeak server host.

[JOSHSKORN]

If the host doesn't open the ports for TeamSpeak then you are out of luck. However, I'm a bit confused as to which host you're talking about. The teamspeak host, or your website host? The website host doesn't need any ports opened, only the teamspeak server host.

Basically, I had this website on another host at one time.  The TeamSpeak block worked perfectly there.  It was referencing the same TeamSpeak server and everything.  In fact, I didn't change any settings.  I even checked the permissions and made sure that it said 777 for all files.

[G6Cad]

Please read the posting guides we have in the forum and site.
No support will be given in the block code and snippets board.
I will move this to support

Little late to be moving it this thread has been here for 2 years with Admins even joining the discussion.

The rule for "no support in the block code and snippets board" have only been on the site for a short time. So thats why the admins didnt say anything before, and thats the reason i moved it now and asked you to read the guide again. The guide do get updated sometimes

[JOSHSKORN]

OK I hope I'm posting in the right forum, this doesn't appear to be the block code and snippets board, the link tree up above says "Forum>Development>Support>Teamspeak block!"

Anyway, I've switched hosts, sort of. I'm on my friend's hosts, who doesn't have the privilege to create an additional database so I'm still using the SMF database off the old host, just have my website on my friend's host.  He's working on resolving this problem.

As I said, my TS block is partially working.  Unfortunately, I now get a bunch of junk above my TS Query, below the title, which says:

Code Select Expand


Warning: Call-time pass-by-reference has been deprecated; If you would like to pass it by reference, modify the declaration of fsockopen(). If you would like to enable call-time pass-by-reference, you can set allow_call_time_pass_reference to true in your INI file. in /home/.hobbes/clansrv/www/thesite/teamspeak/ts_config.inc.php on line 216

Warning: Call-time pass-by-reference has been deprecated; If you would like to pass it by reference, modify the declaration of fsockopen(). If you would like to enable call-time pass-by-reference, you can set allow_call_time_pass_reference to true in your INI file. in /home/.hobbes/clansrv/www/thesite/teamspeak/ts_config.inc.php on line 216

Warning: Call-time pass-by-reference has been deprecated; If you would like to pass it by reference, modify the declaration of fsockopen(). If you would like to enable call-time pass-by-reference, you can set allow_call_time_pass_reference to true in your INI file. in /home/.hobbes/clansrv/www/thesite/teamspeak/ts_config.inc.php on line 273

Warning: Call-time pass-by-reference has been deprecated; If you would like to pass it by reference, modify the declaration of fsockopen(). If you would like to enable call-time pass-by-reference, you can set allow_call_time_pass_reference to true in your INI file. in /home/.hobbes/clansrv/www/thesite/teamspeak/ts_config.inc.php on line 273

I put it inside a code block because I felt it was a lot of text and didn't want to make everyone scroll so much.

Let me know what the problem is, or if I need to post any additional files.  All CHMODs have been set to 777, both the Teamspeak folder and the files inside of it.

[G6Cad]

It's just what the line say.
You need to configure the php.ini file on the server you are on to get this to work.
How to do that you need to ask your friend to figure out.

[zuma13]

Hi there!

I'm using this block now, works good, but I need help on 2 things please:

1) Longer channel names mess with the look of it, the channels icons go to the second line. I wanted to get rif of the channel info (aka (RS) (RSD) (RPS) things) to prevent this from happening. Can anybody help me findind wich variable/part of code I should remove? The code isn't commented at all and I'm too noob to find out alone lol.

2) I've read almost all pages of posts and noticed that it has already been discussed, although no one could implement it at that time. I'm talking about being able to login with a registered TS user. I run a script that does it perfectly at http://www.zbase1.com/, but since it's hosted somewhere else it takes an annoying amount of 5 seconds to load the TS info. Basically what it does is show the fields required right in the block (no annoying pop-ups) just like it is in the TS client. It even handles with anonymous users too, like you can see in the following screenshot:



Hope someone can help, it'd be perfect for many ppl then.

[biggsy]

Hi all, i installed the ts block, awesome piece of kit, created a php block and entered the code as suggested, by on my site where the teamspeak block should be i get this error....

Parse error: syntax error, unexpected '&' in /home/utclan/public_html/Sources/Load.php(1735) : eval()'d code(35) : eval()'d code on line 1

If i type the exact url of the ts_viewer.php it shows fine but just not in my block

Any ideas guy and gals???


Many Many Thanks

bigs