*

Author Topic: There Is A Gap Where A Panel Is Supposed To Be.  (Read 1014 times)

Offline Ken

  • Administrator
  • Full Member
  • *****
  • Posts: 138
There Is A Gap Where A Panel Is Supposed To Be.
« on: November 16, 2015, 04:11:18 PM »
This means you have no and/or activated blocks in that panel. You need to active/create some blocks within that panel, or turn the panel off since you are not using it.

To create a block with that panel, go to: TinyPortal > Panels & Blocks > SELECT YOUR AREA > Blocks > Add Block".

To active a block within that panel, go to: TinyPortal > Panels & Blocks > SELECT YOUR AREA > Blocks > SELECT YOUR BLOCK", then select "Activate".

If you are not using any blocks for that panel, simply turn off your panel by going to: "TinyPortal > Panels & Blocks > SELECT YOUR PANEL > Use Panel", then select "Off".

Doc Written 11/16/2015 By: Ken.